Re: anti-newton ring glass

Hi Chris,
What a great idea! I hadn't thought of making my own holder. I think
I'll give that a try before ordering any gadgets!

Traci Bunkers
Bonkers Handmade Originals
Tub Legs Zinestress
http://www.bonkersfiber.com

On Dec 8, 2004, at 5:34 PM, Pinhole Blender wrote:

> I used black mat board and cut an extra long negative holder. I
> measured
> the height of the negative in its present carrier and found that it was
> the same height as the black mat board would make it. Just line the mat
> board up to your present holder and trace its outline then extend the
> 120 area in the direction of your light. On my epson scanner there is a
> cut out section at the top that the scanner uses to set the calibration
> with. Make sure you cut this area out as well. I just tape my negatives
> to this holder and position it on my scanner. I laminated my holder so
> that tape pulls off easily but a layer of packing tape around the
> edge's should work. This seems to work well when I scan my pinhole
> blender images..
>
> Chris
> --
> Pinhole Blender
> chris@pinholeblender.com
> http://www.pinholeblender.com
>
>
>> -------- Original Message --------
>> Subject: [pinhole-discussion] anti-newton ring glass
>> From: "Traci Bunkers" <bonkers@bonkersfiber.com>
>> Date: Wed, December 08, 2004 11:46 am
>> To: pinhole-discussion@spitbite.org
>>
>> I am thinking of buying anti-newton ring glass for when I scan long
>> negatives on my flat-bed scanner that are too long for my 120 film
>> holder.
>>
>> Has anyone had experience with this? Here's the one I was looking at:
>> http://home.earthlink.net/~dougfisher/holder/insert.html
>>
>> Traci Bunkers
>> Bonkers Handmade Originals
>> Tub Legs Zinestress
>> http://www.bonkersfiber.com
>>
>> _______________________________________________
>> Post to the list as PLAIN TEXT only - no HTML
>> pinhole-discussion mailing list
>> pinhole-discussion@spitbite.org
>> FAQ at http://spitbite.org/pinhole-discussion/list.html
>
> _______________________________________________
> Post to the list as PLAIN TEXT only - no HTML
> pinhole-discussion mailing list
> pinhole-discussion@spitbite.org
> FAQ at http://spitbite.org/pinhole-discussion/list.html
>

_______________________________________________
Post to the list as PLAIN TEXT only - no HTML
pinhole-discussion mailing list
pinhole-discussion@spitbite.org
FAQ at http://spitbite.org/pinhole-discussion/list.html
Received on Wed Dec 8 16:00:45 2004