or...
just fix it for 1/2 the time in the tube then dump it into a fixer tray.
TMax, especially, has an indicator built into it (the infamous purple) that
indicates incomplete fixing so you want to be careful removing the
coloration w/ HCA to pull it out.
andy
-----Original Message-----
From: pinhole-discussion-admin@pinhole.com
[mailto:pinhole-discussion-admin@pinhole.com]On Behalf Of Clay Harmon
Sent: Sunday, April 14, 2002 12:24 PM
To: pinhole-discussion@pinhole.com
Subject: [pinhole-discussion] BTZS tubes; fixing
One of the big reasons to fix in a tray using the BTZS tubes is to get the
fixer to the back of the film so it will remove the pink anti-halation
backing during fixing. The only knock on the tubes is that you do tend to
have problems with the antihalation dye remaining on the back of the
negative. Hypo clear will help get rid of it.
Clay
_______________________________________________
Post to the list as PLAIN TEXT only - no HTML
Pinhole-Discussion mailing list
Pinhole-Discussion@pinhole.com
unsubscribe or change your account at
http://www.pinholevisions.org/discussion/
Received on Sun Apr 14 12:44:52 2002
This archive was generated by hypermail 2.1.8 : Mon 13 Dec 2004 - 23:18:44 PST