You could try NOT processing the film in the field. If I remember correctly you can push the dark slide
back in place and pull the film out of the holder without processing the film.
Once home you could put the film back in the holder and engage the processing level and pull the film
through to process it.
But then you don't get to see the results immediately and its not much different than using regular film.
Gord
On Thu, Feb 21, 2002 at 07:02:19AM -0500, Howard Wells wrote:
> Date: Thu, 21 Feb 2002 07:02:19 -0500
> From: Howard Wells <sandwell@earthlink.net>
> Subject: [pinhole-discussion] Type 55 Field Use
> To: pinhole-discussion@pinhole.com
>
> Tupperware (or other flat sealable plastic) container with interleaved
> paper towels and a sponge of enough thickness to hold the stack of
> negatives still when the container is closed. Wetting agent is water or
> Permawash. Or the bucket clearing tank with the filmholder insert
> available from various sources.
> Howard Wells
>
> DAlfrey@aol.com wrote:
> >
> > While the focus is on discussion of Typ55 Polaroid films, I have a question.
> > Once I press the "process" lever on my 4X5 film holder and pull and wait
> > the amount of time needed to develop correctly , I then peel apart the
> > 'pod(?) and seperate the negative from the positive print , and wash in Hypo
> > Clearing Agent , then hang to dry, and print from there , once the neg is dry
> > .This is easily done at home , but........
> > My question to those of you who use Type 55 in the field is this, "How do you
> > keep the negative moist until you get home and can process the neg with HCA ?
> > A holding tank of some sort, a bucket of water, zip lock baggie filled with
> > water, ? Any suggestions . ?
> >
> > Thanks
> > DAlfrey@aol.com
> >
> > _______________________________________________
> > Post to the list as PLAIN TEXT only - no HTML
> > Pinhole-Discussion mailing list
> > Pinhole-Discussion@pinhole.com
> > unsubscribe or change your account at
> > http://www.pinholevisions.org/discussion/
>
> _______________________________________________
> Post to the list as PLAIN TEXT only - no HTML
> Pinhole-Discussion mailing list
> Pinhole-Discussion@pinhole.com
> unsubscribe or change your account at
> http://www.pinholevisions.org/discussion/
Received on Thu Feb 21 10:05:35 2002
This archive was generated by hypermail 2.1.8 : Mon 13 Dec 2004 - 23:18:43 PST