AW: AW: loading paper into a cancamera

Re: AW: [pinhole-discussion] loading paper into a cancameraThat's what I
thought until one day, having travelled a distance to take photos, instead
of images I found only dark round spots caused by the light hitting the
backside of the paper that had shifted enough to cover the hole.......
  -----Ursprüngliche Nachricht-----
  Von: pinhole-discussion-admin@pinhole.com
[mailto:pinhole-discussion-admin@pinhole.com]Im Auftrag von R Duarte
  Gesendet: Samstag, 22. Dezember 2001 08:16
  An: pinhole-discussion@pinhole.com
  Betreff: Re: AW: [pinhole-discussion] loading paper into a cancamera

  wow, i just put it in the can and close the lid. :) it always seems to
keep itself in place because of the curved wall.

    From: "Markus Birsfelder" <birs@active.ch>
    Reply-To: pinhole-discussion@pinhole.com
    Date: Sat, 22 Dec 2001 07:57:12 +0100
    To: <pinhole-discussion@pinhole.com>
    Subject: AW: [pinhole-discussion] loading paper into a cancamera

    Hi Lukasz

    To hold the paper in place, I glue two pieces of thick cardboard of
about 2 cm2 to the inside of the can. I place one near the bottom and one
near the top, both in line with the pinhole. The paper I use is cut to the
length of the inner circumference of the can less 3-5 mm. This keeps it
safely in place.

    In some cases, instead of cardboard, I used those self adhesive felt
squares that you can buy to stick to the ends of the legs of your chairs to
prevent scratching the floor.

    In a more elaborate version, I drill four holes and weld nails that I
have cut to approx. 3mm length into the holes. This technique was necessary
when I prepared fairly small cans (5 cm diameter).

    Markus

      -----Ursprüngliche Nachricht-----
      Von: pinhole-discussion-admin@pinhole.com
[mailto:pinhole-discussion-admin@pinhole.com]Im Auftrag von ?ukasz
Kacperczyk
      Gesendet: Samstag, 22. Dezember 2001 05:27
      An: pinhole
      Betreff: [pinhole-discussion] loading paper into a cancamera

      Hi there,
      I'm new here, so my question is quite basic, namely: how do you load
(I mean position) paper into a can camera? Do you use a tape that has both
sides adhesive, or a normal one-sided tape? How do you make the paper stick
to the camera's wall?
      Thanks in advance,
      Best regards,

      ?ukasz

--------------------------------------------------------------------------

      Tego nie znajdziesz w z™adnym sklepie!
      [ http://oferty.onet.pl ]

--------------------------------------------------------------------------
Received on Sat Dec 22 03:23:43 2001