It'll be rolled with the emulsion to the inside, and you can cut your own
notch. ----- Original Message -----
From: "Uptown Gallery" <gallery@uptowngallery.org>
To: <pinhole-discussion@pinhole.com>
Sent: Tuesday, December 04, 2001 1:23 AM
Subject: [pinhole-discussion] 1) film holder light leaks 2) roll film
cutting
> Hello:
>
> 1) I've acquired some 4 x 5 and 5 x 7 film holders thru both the
generosity
> of list members and eBay shopping.
> Is there anything that can be done with holders declared to be 'leaky' by
a
> previous owner? I haven't tried them yet.
>
> 2) Has anyone here any experience with cutting film or paper from a full
> roll with a homemade fixture? A local pro studio photographer says he just
> made up a little fixture because he didn't do it often enough to but a
> dedicated fixture, but I don't know if or when I'd be able to get to see
> his.
>
> I'm anticipating the arrival of my 5" roll film, but some realities are
> sinking in - I have to cut it to size, I may not be able to tell which
side
> is which, there will probably be no notches, as it was made for continuous
> use in shooting and development, and I will probably have to do my cutting
> in batches (don't know where it'll get stored, but at least the garage is
> cold for the winter).
>
> Thanks
>
> Murray
> Thanks
>
>
> _______________________________________________
> Pinhole-Discussion mailing list
> Pinhole-Discussion@pinhole.com
> unsubscribe or change your account at
> http://www.pinholevisions.org/discussion/
>
Received on Tue Dec 4 06:39:29 2001
This archive was generated by hypermail 2.1.8 : Mon 13 Dec 2004 - 23:33:31 PST