Re: Calumet C2 Holder

There is an oblong hole to the far side of the plate the film is placed
behind as you load it. Align the arrow there. Be warned (as you bought
this used): these units have weak gear trains. If you have an older style
unit and someone has replace the gear train with newer style part (all that
is currently available) your film "arrow" oblong window will now be wrong.
In this (common) situation, place the arrow under the roll bars. Yes I know,
you can't see the arrow in this situation. But, it is easily estimated.

Hope that helps.

-- 
Tom Ferguson
http://www.ferguson-photo-design.com
> From: "Tom Miller" <twmiller@mr.net>
> Subject: [pinhole-discussion] Calumet C2 Holder
> 
> Dear All,
> 
> Does anyone have experience with a Calumet C2 rollfilm holder?  I
> bought one used two or three months ago, and have been using it with a
> Leonardo.  Basically, it works great, except for one thing: I don't
> know how to align the start marks on the 120 or 220 film to make sure
> that Frame 1 lines up correctly for the first exposure.