Johanna
I have a XG-7 that I made a pinhole body cap for and it works just fine.
I drilled a 1/2 in. (13mm) hole in the center and used silicone adhesive
to glue the pinhole on the inside .The silicone adhesive holds great and
can be removed with little trouble. Soda can aluminum ( pop can here in
the midwest ) is fine. Just paint the back of the pinhole flat black and
don't forget to check the pinhole is not covered . With a .012 pinhole
the focal length would be about 45mm with a f stop of 145. Exposure
times? Call it f180 meter for f16 and add 7 stops. I can't give times to
much depends on type of film.You might want to epoxy a step ring on so
you could use filters. I hope this helps.
Dave O
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
Received on Tue Jun 26 19:15:47 2001
This archive was generated by hypermail 2.1.8 : Mon 13 Dec 2004 - 23:33:22 PST