Re: glue for bellows construction.

I have made shims out of heavy paper, which helps the folding a lot. I
really meant what glue for the shims.
----- Original Message -----
From: Andy Schmitt <aschmitt@warwick.net>
To: <pinhole-discussion@pinhole.com>
Sent: Friday, May 25, 2001 8:23 AM
Subject: RE: [pinhole-discussion] glue for bellows construction.

> >From my files...
> from Doug Bardell - http://www.cyberbeach.net/~dbardell
> "The glue I'm using now is from Sears. Its a pressure sensitive glue,
white
> very sticky apply and let dry until clear and press on material etc."
>
> Are you backing it with black card stock or anything? Normal DR Cloth can
be
> a bit floppy & flexible. Doug has a good article on bellows, etc.
>
> see ya
> andy schmitt
>
> -----Original Message-----
> From: pinhole-discussion-admin@pinhole.com
> [mailto:pinhole-discussion-admin@pinhole.com]On Behalf Of William
> Erickson
> Sent: Friday, May 25, 2001 8:52 AM
> To: pinhole Discussion
> Subject: [pinhole-discussion] glue for bellows construction.
>
>
> I am seeking advice on what sort of adhesive to use when making a bellows
> out of darkroom cloth. I've been using the spray adhesive but it is messy
> and bulky. tried super glue with no success.
>
>
> _______________________________________________
> Pinhole-Discussion mailing list
> Pinhole-Discussion@pinhole.com
> unsubscribe or change your account at
> http://www.pinhole.com/discussion/
>
>
> _______________________________________________
> Pinhole-Discussion mailing list
> Pinhole-Discussion@pinhole.com
> unsubscribe or change your account at
> http://www.pinhole.com/discussion/
>
Received on Fri May 25 14:24:02 2001