>From: B2MYOUNG@aol.com
>Reply-To: pinhole-discussion@pinhole.com
>To: cflagg@ispchannel.com, pinhole-discussion@pinhole.com
>Subject: Re: [pinhole-discussion] Re:[pinhole-discussion]lesson plan
>Date: Tue, 27 Mar 2001 21:21:13 EST
>
>
>In a message dated 3/27/01 6:41:18 PM, cflagg@ispchannel.com writes:
>
><< We use soda cans, drill with a
>
>needle driven into a 3/8" dowel(Thanks Stewart Woodruff),
>
>into an eraser. Then sand the burr created with fine
>
>sandpaper and tape it over the hole. >>
>
>That's EXACTLY HOW WE DO IT!
>leezy
>
>_______________________________________________
>Pinhole-Discussion mailing list
>Pinhole-Discussion@pinhole.com
>unsubs//www.pinhole.com/discussion/
I buy an aluminum cookie sheet from the grocery store and cut it into one
inch squares. Then we drill a pinhole into it with sewing needles (usually
#10) and emery paper. The drilling is from both sides to produce the
smoothest hole. Finally,we use a drill to make a larger hole and center the
pinhole inside of it.
pinholeman
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Received on Tue Mar 27 22:21:41 2001
This archive was generated by hypermail 2.1.8 : Mon 13 Dec 2004 - 23:33:20 PST