Lisa,
I start young students with the 35mm film cannisters pinhole
cameras. I use a standard single paper punch to put a 1/4"
hole in the cannister. We use soda cans, drill with a
needle driven into a 3/8" dowel(Thanks Stewart Woodruff),
into an eraser. Then sand the burr created with fine
sandpaper and tape it over the hole. A piece of electrical
tape is used for a shutter. I too cut the paper ahead of
time and store in the safebox. My older students start with
a Pringle's Snack ca(3.5"x5"format)spray with flat black
paint and follow a similar plan as the 35mm. A great source
of cannisters is your local photo processing shop. They
have been great about saving them for me.
Good Luck,
Chuck Flag
Received on Tue Mar 27 18:38:39 2001
This archive was generated by hypermail 2.1.8 : Mon 13 Dec 2004 - 23:33:20 PST