remember tho, you have to take the pack out of the camera & stick it in the
"autopcessor" in the DARK...or it will leak light all over your pretty
picture.. ;~ )
andy
-----Original Message-----
From: pinhole-discussion-admin@pinhole.com
[mailto:pinhole-discussion-admin@pinhole.com]On Behalf Of Figurefoto@aol.com
Sent: Tuesday, January 16, 2001 5:22 PM
To: pinhole-discussion@pinhole.com
Subject: Re: [pinhole-discussion] Late breaking discoveries about Polaroid
600 film pa...
In a message dated 1/16/01 2:18:44 PM Pacific Standard Time,
aschmitt@warwick.net writes:
Using the skinny part of the Velcro, I placed about a 1" square where
the
pull tab joins the film pack. There is also a strip about 1/4" wide &
an
inch long on the rear of the pack between where the battery is exposed
and
the edge of the pack (on both sides).
With a 3 point attachment, the Velcro should have no problem holding the
pack firmly against the camera....
I thought of trying this but i was afraid it would leak light,good job!!
Harry
Figurefoto.com
Received on Tue Jan 16 17:48:48 2001
This archive was generated by hypermail 2.1.8 : Mon 13 Dec 2004 - 23:33:17 PST