Re: [pinhole] Press Camera and Pinhole

I had the same problem with the drop bed, which prompted me to build this
camera:

http://www.silver-bayou.com/pinhole/interest.htm

I've posted this on the list once or twice over the last couple of years, so
it won't be new to some people. I built it in '97.

Its VERY wide angle, no dropbed to get in the way, rollfilm. The
measurements are on the site if you wanted to build one yourself.

Dwight

----- Original Message -----
From: Michael G Heath <mgheath@raha.com>
To: <discussion-list@pinhole.com>
Sent: Thursday, August 17, 2000 6:12 AM
Subject: Re: [pinhole] Press Camera and Pinhole

> I've used a Graphic with pinhole, but you'll find the drop bed, even when
> dropped, starts to appear in the image in super wide focal lengths of
about
> 60mm or shorter. Am looking for a beat up Graphic without the drop bed,
or
> at least one which I won't feel guilty about cutting off for superwide
pics.
>
> Mike
>
> ----- Original Message -----
> From: Best <dilcher@cueva.com>
> To: <discussion-list@pinhole.com>
> Sent: Wednesday, August 16, 2000 10:34 PM
> Subject: [pinhole] Press Camera and Pinhole
>
>
> > I recently purchased a Crown Graphic
> > 4x5 press camera off ebay.
> >
> > While I will be using it with the
> > standard glass lens, I was thinking
> > of making a custom lensboard with
> > a rotating pinhole turret.
> >
> > Has anyone on the list used a press
> > camera for pinhole work? I'd be
> > interested in any impressions or
> > experiences you could pass along.
> >
> > Thanks!!
> > Jeff Dilcher
> >
> > =============================================
> > Discussion List subscribers: 302 (16-Aug-2000)
> > List archive - http://www.pinhole.com/discussion/
> > To unsubscribe, send an email to discussion-list-request@pinhole.com
with
> the subject "unsubscribe".
> > =============================================
> >
>
> =============================================
> Discussion List subscribers: 302 (18-Aug-2000)
> List archive - http://www.pinhole.com/discussion/
> To unsubscribe, send an email to discussion-list-request@pinhole.com with
the subject "unsubscribe".
> =============================================
>
>
Received on Sat Aug 19 01:08:41 2000